PE Cast Film Supply for US Surgical Drape OEMs
PE Cast Film Supply for US Surgical Drape OEMs

Project background
A converter in Charlotte, North Carolina, produces disposable surgical drapes and procedure kits. They laminate a cast film to a nonwoven to build the liquid-barrier side of the drape, and they were replacing an incumbent film supplier whose pinhole rate had begun to drive scrap up on their coating line.
Specification we agreed
Thickness: 30 to 60 micron, with the converter running 40 micron for standard drapes and 55 micron for heavy-duty kits.
Pinhole and gel count: visual inspection of 200 m² per lot, with a written accept limit of two pinholes per 100 m² rather than a verbal one.
Width: 1,600 mm master, slit to the converter's 1,200 mm laminating width with edge trim agreed in advance.
Heat-seal behaviour: seal strength and seal window agreed on the converter's own laminator, not only in our lab.
Surface: corona-treated to 38 dyn/cm on the laminating face, dyne level confirmed per roll.
How the film is documented
Each lot ships with a certificate of analysis covering thickness, mass per unit area, tensile strength and elongation in machine and cross direction, pinhole inspection result and dyne level.
For the device file, the converter needed more than a CoA. We supplied biocompatibility test reports to ISO 10993-5 and ISO 10993-10 for the film construction in use, USP Class VI results on request, a statement on heavy metals and extractables relevant to the patient-contacting side, and a change-notification clause so that any resin or additive change reaches them before it reaches a shipment. Items in brackets apply only where the finished device requires them; the exact scope is set with the converter's regulatory team.
Outcome
Scrap on the coating line fell from 4.2 percent to 1.8 percent after the second lot, once the seal window had been re-set to the new film. The converter moved two of its four drape SKUs onto our film within six months and now holds six weeks of safety stock at the plant.
Buying notes for converters
Agree the seal window on your own machine. A film that seals perfectly in a supplier lab can still run narrow on your line.
Write the pinhole accept limit into the specification. "No pinholes" is not a workable purchase criterion.
Decide early whether the film needs a biocompatibility file of its own or rides on the finished device file. It changes what the supplier has to hold.
Related Projects
Explore more of our case studies.

